Grace Q'nique 14+, Руководство пользователя

Страница: 9 / 42

9
Installing The Encoder
Onto The Carriage
1. Use the 4mm allen wrench to remove the M6 x 16mm SBHCS from the outer, left, rear wheel, in the
Bottom Plate.
2. Put the wheel, which you just removed, onto the encoder wheel bolt of the black spring encoder, with
the flanged hub facing out, away from the encoder.
3. Use the 2mm allen wrench to loosen the set screw in the lock collar, without removing it, so that the
encoder wheel bolt can turn freely.
4. Hold the encoder to prevent it from rotating, and use the 4mm allen wrench to fasten the encoder
wheel bolt into the hole made available in the first step.
5. Keep the spare bolts with your quilting frame’s spare parts.
6. Leave the encoder’s set screw loose. They will be tightened after you place the sewing machine on
your frame.
If the encoder is attached on the inside of the
bottom carriage, as shown above, the encoder
spring must be tensioned in the opposite direction.
See the encoder spring tensioning image on page
11 for direction on tensioning the encoder spring
Encoder With
Black Spring
Encoder With
Black Spring
Loosen The Set
Screw Using The
2mm Allen Wrench