Grace Q'nique 14+ Скачать руководство пользователя страница 4

Страница: 4 / 42

Grounding Methods

Figure 61.1

(B)

Cover of

Grounded

Outlet Box

Metal

Screw

(A)

Grounding

Surge

Protector

To Sewing

Machine

(C)

Adapter

Grounding

Means

(D)

Grounding

Surge

Protector

To Sewing

Machine

IMPORTANT SAFETY INSTRUCTIONS

GROUNDING INSTRUCTIONS

This product must be grounded. In the event of malfunction or breakdown, grounding provides a path

of least resistance for electric current to reduce the risk of electric shock. This product is equipped with

a cord having an equipment-grounding conductor and a grounding plug. Plug the cord from the quilting

machine into a surge protector. The surge protector must be plugged into an appropriate outlet that is

properly installed and grounded in accordance with all local codes and ordinances.

DANGER

- Improper connection of the equipment-grounding conductor can result in a risk of electric

shock. The conductor with insulation having an outer surface that is green with or without yellow

stripes is the equipment-grounding conductor. If repair or replacement of the cord or plug is necessary,

do not connect the equipment-grounding conductor to a live terminal. Check with a qualified electrician

or serviceman if the grounding instructions are not completely understood, or if in doubt as to whether

the product is properly grounded.

Do not modify the plug provided with the product - if it will not fit the outlet, have a proper outlet

installed by a qualified electrician.″

This product is for use on a nominal 120 V circuit, and has a grounding plug that looks like the plug

illustrated in sketch A in Figure 61.1. A temporary adaptor, which looks like the adaptor illustrated in

sketches B and C, may be used to connect this plug to a 2-pole receptacle as

shown in sketch B if a properly grounded outlet is not available. The temporary adaptor should be used

only until a properly grounded outlet can be installed by a qualified electrician. The green colored rigid

ear, lug, and the like, extending from the adaptor must be connected to a permanent ground such as

a properly grounded outlet box cover. Whenever the adaptor is used, it must be held in place by the

metal screw.

A qualified electrician should be consulted if there is any doubt as to whether an outlet box is properly

grounded.

Содержание Q'nique 14+











































Результаты поиска

Содержание Q'nique 14+

Отзывы:

Похожие инструкции для Q'nique 14+

Бренды по названию

Популярные бренды

Grace Q'nique 14+, Руководство пользователя

Результаты поиска

Содержание Q'nique 14+

Отзывы:

Похожие инструкции для Q'nique 14+

Бренды по названию

Популярные бренды