Grabo PRO-LIFTER 20, Руководство оператора

Страница: 21 / 164

21
GRABO PRO-LIFTER 20 | Operator’s manual
REPLACING THE RUBBER FOAM SEAL
➑
Remove the rubber foam seal if it has become worn or damaged.
1. Pull out the rubber foam seal
Ⓘ
.
2. Gently press a replacement rubber foam seal into position.
3. Make sure that the replacement rubber foam seal fits correctly and securely.
REPLACING OR CLEANING THE AIR FILTER
➒
Clean the filter when dirty. The filter needs to be replaced when the filter is badly worn or
ripped (at customer’s discretion). This is determined by how the GRABO® Pro-Lifter 20 is being
used. When lifting clean material, the filter will last longer than when being used on dirty/dusty
materials.
1. Turn the GRABO® Pro-Lifter 20 upside down.
2. Use the tip of a screwdriver to remove the air filter lock ring
Ⓚ
and the air filter pad
Ⓙ
.
3. Do one of the following:
a. Clean the filter with compressed air, or
b. Insert a replacement air filter pad.
4. Insert the air filter lock ring to secure the filter.
! Do not clean a dirty air filter with water! It may become clogged and unusable.
! A decrease in suction power indicates that the air filter needs to be cleaned and/or
replaced. Check that the air duct is free from any obstruction or foreign objects during
filter replacement.
WARRANTY
30-DAY MONEY BACK HARD GUARANTEE
New unused power tools and accessories purchased from Nemo Power Tools or one of
our authorized dealers can be returned to our Las Vegas warranty center within 30 days of
purchase. Please contact your dealer to ask about their specific store policy, or ship your
product (prepaid) in its original undamaged packaging along with the original receipt to: Nemo
Power Tools LLC, Eastern Commerce Center, 6000 S Eastern Ave, Suite 8B, Las Vegas, Nevada,
89119
1-YEAR LIMITED WARRANTY
Nemo Power Tools prides itself on its attention to detail, the quality of its products and
materials used. Therefore, we provide this manufacturer's warranty from the date of purchase.
You have the option of registering your GRABO® Pro-Lifter 20 product online, which gives
you the benefit of extending the manufacturer's warranty to a full 18-month period. If you
believe you have received a defective product, or if you are experiencing any problems with
your product, please visit our Support page - www.GRABO.com/GRABO-warranty. Within the
scope of this 1-year warranty, we will repair or replace, any defects of material or workmanship
free of charge. For warranty repair information, call +1 (702)-718-2433. This warranty does
not apply if the damage was caused by improper usage of the tool such as water damage,
dropping the tool, overloading the tool beyond its rated capacity, leaving the tool “on” while
in storage, or any other clear cases of user error. This warranty gives you specific legal rights,
and you may have other rights which vary in certain states or provinces. Nemo Power Tools