umanamedical.com
Page 12 of 27
8.6. Holter Mode
For the first time use, contact your local distributer for an Account or send an email to
1. Log
in
(Internet
connection is required for
account verification).
2. Enter the patient
code/ID and tap “Next”
3.
In the ‘File Manager’
tap ‘Find the Bluetooth
Device’ and select your
device
which
is
identified by its serial
number
4. Choose your sensor,
SmarterSkin
or
Smar (refer
to sensor packaging)
5.
Tap ‘Test Monitor` and
confirm signal on ECG
plot
6. Check that all statuses
are `Connected` and
battery of device is full
before you start a
session.
7.
Tap ‘Start Holter’ to start
a Holter session. Tap
‘Stop Monitor’, to stop the
session.
8. Connection
to
Bluetooth
will
be
automatically
switched
off
and
Monitor
will
start
saving data in its
internal
memory.
(Refer to LED section
in this manual)
Upload of Holter Session
For first time use: Refer to the T1 web application to download and install the Data Transfer Interface on a PC (internet connection
is required).
Содержание Umana T1
Страница 1: ...umanamedical com User Manual Version 7...