background image

HOME FITNESS  |  Remise en forme à domicile

TREADMILL

TAPIS ROULANT

MAINTENANCE

Check the parts for wear before using the machine. 

Always replace the running belt if it becomes hot, if it is damaged, or any other part is defective.

If in doubt, do not use the equipment and contact our technical support.

Use a soft cloth to clean the edge of the tape and the area between the tape and the frame. Do not use any 

liquid to clean the equipment, especially the electrical components.

It is recommended to check the equipment regularly, preferably once a week.

On a monthly basis, vacuum under the machine to prevent dust from accumulating.

Clean and lubricate periodically to extend the life of this unit. To get the best performance from the machine, the 

belt and belt table should be kept as clean as possible. Use a soft cloth to clean the edge of the running belt and 

the area between the running belt and the frame

If the equipment is not used frequently, perform maintenance every 30 days.

Warning: The friction between the belt deck and the belt can play a very important role in the operation and life 

of the machine and that is why we recommend that you constantly lubricate this friction point to extend the life 

of the machine. Failure to do so could void the warranty.

Unplug from outlet before doing any maintenance. Stop the tape before folding the machine.

Take precautions to protect carpets or floors in case of leaks. This product is a machine that contains moving parts 

that have been greased / lubricated and may leak.

THIS PRODUCT IS FOR HOUSEHOLD USE ONLY, NOT SUITABLE FOR USE IN PROFESSIONAL OR HEALTH 

ESTABLISHMENTS OF ANY KIND.

GENERAL CARE

GENERAL CLEANING

Claims for following issues are not accepted:

• Hits.

• Falls.

• Misuse.

• Improper installation or assembly of the product.

• Damage or wear caused by improper use; excessive use, commercial and / or professional use of the product.

• Damage caused by oxidation, sulfation, humidity, exposure to rain and / or water or sources of excessive heat,       

  use of abrasives, corrosion.

Содержание GZE-2205




























Отзывы: