ERROR CODE
E1
Communication abnormal:
The control and computer
have abnormal
communication after start
No voltage sensor from motor The communication wire is faulty
No Wireless Speed Sensor
Network: Cannot receive the
motor speed sensor feedback
Current overload faulty
Explosion-Proof Protection
：
Some unusual condition of
power or voltage that cause
damage to the motor drive
circuit.
1. The speed sensor is not assembled
correctly
2. Speed sensor faulty
3. Controller faulty
1. Motor faulty
2. The rated current in controller is too low
3. The current is over the rated level
1.The power voltage is too low
2. Burning smell from controller
• Use the standard voltage
• Change the controller
• Check if the speed sensor is
attached well
• Change the speed sensor
• Change the controller
• Check if the motor is burned out
and change the motor
• Change the controller
• Check if the user weight is over
the limited
• Check if the wire is loose and
attached
1. The main console line is not plugged well
2. The main console line is faulty
3. Console faulty
4. Controller faulty
• Check if the plug is attached well
• Change the console line
• Change console
• Change controller
E2
E3
E5
E6
E7 No display
Not working
The running belt is not smooth
1. No power
2. Safety key faulty
3. Short circuit
4. The power switch is not on
1. Needs lubrication
2. Running belt is too tight
• Add the lubrication
• Adjust the belt
• Plug in the power
• Put on the safety key
• Check the controller line and
sensor system
• Turn on the power
Safety key faulty
Change the safety key
The running belt slipped
• Adjust the belt
• Adjust the motor belt
HOME FITNESS | Remise en forme à domicile
TREADMILL
TAPIS ROULANT
TROUBLE SHOOTING
CAUSE
SOLUTION
1. Running belt is too loose
