14
CLEANING & MAINTENANCE
DISASSEMBLING
1.
1.
Make sure that the motor has
turned off completely.
2.
2.
Unplug the unit from the power
outlet.
3.
3.
Disassemble the unit by reversing
the steps from Figure 1-6 on
Page 9.
4.
4.
To remove the cutting plate
easily, place a screwdriver
between the cutting plate and
the head as illustrated and lift it
up (fig. 18).
5.
5.
Hold the grinder head with one
hand and loosen the knob on
the side of the unit with the
other hand by turning it counter
clockwise as shown in Figure 19.
6.
6.
Once the knob is loosened, pull
the grinder head out as shown in
Figure 19.
Figure 18.
Figure 19.
