8
USING
YOUR C
OFFEE MAKER
•
Insert the milk spout. Fill the milk tank and make sure it is inserted in the
correct position. If not inserted properly, the machine will not operate.
•
Before brewing, make sure the tank is filled with enough water.
•
Lift the water reservoir lid
-
fill the reservoir with the desired amount of
water and ensure it does not exceed MAX mark on the reservoir. Never use
warm or hot water to fill the water reservoir. Close the water reservoir lid.
•
Plug in and press the power button. The power button will begin to flash as
the system begins to preheat. When the power button stops flashing the
machine is in standby mode and ready to start brewing.
•
When the machine is in standby
mode for over five minutes, the
system will go into energy saving
mode and all lights will flash.
Press any one button
to restart.
1. Carefully unpack your Coffee / Tea Maker and remove all packing materials.
2. Remove any dust that may have accumulated during packaging.
3. It is advisable to first wash all removable parts with
warm soapy water and soft cloth. Rinse and dry thoroughly.
4. Run a full water cycle in the coffee machine and built-in milk frother.
5. Place a mug or coffee cup on the cup holder grid.
Using Your Coffee Maker For The First Time
Note: The machine will not be able to operate
without water in the water reservoir or
if the milk tank is not assembled.
Water
Reservoir
Power
Light
Milk
Tank
Milk
Spout
MAX
MAX
Line
Note:
Two beeps continuously means the tank
needs water. The beeping will stop when
water is added. One beep means the milk
frother is not positioned correctly. Reposition
and check if the magnet cover is missing.
