14
CLEANING AND MAINTENANCE
Warnings
1. If the functions of the machine are not working
properly, power off the machine and wait a few
minutes before restarting.
2. After continuously using the machine (6 cycles, or
less then 10 minutes between 2 cycles) the
machine will be hot. The system will use the water
that’s already inside to cool off the machine. Steam
will escape from the steam release hole and the
drip plate tray will become hot.
Do not touch.
DESCALING THE COFFEE MAKER
• After using your 6-in-1 coffee maker for a while, limescale will begin to build
up
inside the machine. It is important to descale your appliance every
2-3 months. If the machine is used daily, the descaling process should
be done monthly.
• Plug the appliance into a wall outlet.
• Mix equal parts vinegar and water and pour it into the coffee maker.
• Press the coffee button to start the brewing process.
• When the brewing process is complete, fill up your 6-in-1coffee maker with
waterand begin brewing again. This is to rinse it off any remaining vinegar.
•
You may have to run one more cycle of brewing water to remove the vinegar odor.
Type of Water
Soft Water (Filtered Water)
Every 80 Brew Cycle
Every 40 Brew Cycle
Hard Water (Tap Water)
Cleaning Frequency
The following table gives the suggested cleaning intervals:
