15
CLEANING AND MAINTENANCE
CAUTION:
• In order to care for the machine, ensure to allow the machine
to rest for 3 minutes in between two milk foam function
cycles.
• After the milk foam spout is finished frothing- the milk foam
spout will be very hot. Do not touch the metal parts.
•
Holders may be hot after brewing- handle with care.
•
The K-cup Holder has a sharp blade on the inside of the
container- which is designed to puncture the capsule,
handle with care to avoid injury from the needle.
•
The water temperature inside the holder is extremely hot,
therefore, do not open the upper jaw areas while brewing is
taking place.
• Always make sure there is nothing blocking the milk spout
and milk tube at anytime.
•
Clean the milk spout and milk tube daily.
Disposal
Dispose of the packaging in the proper manner. If at any time you should
need to dispose this product please note that waste electrical products
should not be disposed of with household waste. Please recycle. Check
with your local retailer for recycling advice.
