11
Specific Series A-C 2000 close-coupled
pumps instruction
Pump identification
There are two identification plates on each pump.
The pump rating plate gives identification and rating
information. Figure 3 shows an example of a typical
Rating Plate.
Permanent records for this pump are kept by the
Serial Number and it must, therefore, be used with
all correspondence and spare parts orders. The last
digit indicates the specific pump on orders for more
than one pump. For example, if an order called for six
pumps, all pumps would have the same first three sets
of digits and the last digit will change to identify each
of the six. (e.g. 1-21938-1-1, 1-21938-1-2, etc.)
The identification number is a number which the end
user of the pump requests to be put on the rating
plate to identify the pump in his operation. (e.g.
CWP-11 stands for Chilled Water Pump No. 11.)
The frame plate, Figure 4, gives information
concerning the bearing and their lubrication. The
inboard and outboard bearing numbers refer to the
bearing manufacturer's numbers.
Figure 4 - Frame Plate
Figure 3 - Rating Plate
