Operating Manual HG G-98830YA | English, Revision 02 | Date: 21.06.2021
52
Chapter 10 – Configuration of the System via the Service Interface
10.2.3 Activate Sub Menus
The main menu shows a list of sub menus:
To activate sub menus:
Enter the bracketed keyboard symbol.
The sub menu is displayed.
To leave the individual menus.
Press the key
.
The main menu is displayed.
The following menu items are described one after the other in this chapter:
(
)erial Output (see 10.2.5 on page 52)
(
)ime & code (see 10.2.6 on page 56)
(
)requency & Antenna tuning (see 10.2.7 on page 60)
Basic C(
)N-Parameters (see 10.2.8 on page 62)
CA(
)open Parameters (see 10.2.9 on page 65)
isplay Systemstatus (see 10.2.10 on page 69)
Cs(
) (see 10.2.11 on page 69)
(
) display Histogram (see 10.2.12 on page 70)
(
)rite transponder (see 10.2.13 on page 71)
(
)oad values to EEProm (see 10.2.14 on page 71)
(
)pdate Firmware (see 10.2.15 on page 72)
(
) Import / (
) Export User Parameter (see 10.2.16 on page 72)
P(
)int Parameters (see 10.2.17 on page 73).
10.2.4 Setting and Permanently Saving Parameters
You can set the parameters in the sub menus as follows.
Enter the bracketed keyboard symbol.
The parameter is activated.
Enter a value using the keyboard.
Confirm the parameter input with Enter
.
Before changed values are transferred to the permanent memory, they have to be
saved.
To prevent accidental saving, you have to enter the password in the menu
(L)oad val
-
ues to EEProm
. 0815 and 815 will work alternatively.
Save the parameters as described in chapter 10.2.14 „(L)oad values to EEProm“
on page 71.
The parameters will be permanently stored.
10.2.5 (S)erial Output
Changes in the (S)erial Output menu item only take effect after you have perma
-
nently saved them (see 10.2.14 „(L)oad values to EEProm“ on page 71) and briefly
disconnected the antenna from the supply voltage (system reset). Depending on the
