Gossen MetraWatt METRALINE PAT Скачать руководство пользователя страница 27

Страница: 27 / 32

GMC-I Messtechnik GmbH

10.5

U – Testing the DUT (ELV) in the
Presence of Line Voltage

Connection

➭

Insert the test object’s mains plug into
the test socket.

➭

Connect the first probe to the black GND
socket.

➭

Connect the second probe to the red
probe socket.

Procedure

➭

Press the

key.

➭

Turn off the device under test.

➭

Switch line voltage to the test socket by
pressing the

key.

As soon as line voltage is applied to the test
socket, the LED for the high-voltage arrow
lights up red.

➭

Review the default parameter for “ELV
Parts”, select it if necessary using the





scroll keys and adjust it to the mo-

mentary value (“Yes” or “No”) using the



scroll keys.

➭

Contact the DUT’s voltage output with
both probes.

➭

If the parameter for “ELV Parts” is set to
“Yes” and if the measured value is be-
tween the specified min. and max. val-
ues,

appears at the display.

➭

You can repeat the measurement by
pressing the



scroll key (reset), after

which

disappears briefly until the next

measurement is performed.

Ending the Test

➭

Press the

key in order to end the test

and disconnect the test socket from the
mains.

Содержание METRALINE PAT

































Результаты поиска

Содержание METRALINE PAT

Отзывы:

Бренды по названию

Популярные бренды

Gossen MetraWatt METRALINE PAT, Руководство по эксплуатации

Результаты поиска

Содержание METRALINE PAT

Отзывы:

Бренды по названию

Популярные бренды