GORMAN-RUPP PUMPS SE Series, Инструкция по установке и эксплуатации

Страница: 4 / 14

SE SERIES OM-06617
2
SAFETY
SAFETY
Because pump installations are seldom
identical, this manual cannot possibly pro­
vide detailed instructions and precautions
for each specific application. Therefore, it
is the owner/installer's responsibility to en­
sure that applications not addressed in this
manual are performed only after establish­
ing that neither operator safety nor pump
integrity are compromised by the installa­
tion.
Before attempting to open or service the
pump:
1. Familiarize yourself with this man­
ual.
2. Unplug the power cable from its re­
ceptacle to ensure that the pump
will remain inoperative.
3. Allow the pump to completely cool
if overheated.
5. Close the discharge valve (if
used).
This pump is designed to handle dirty water
that does not contain large entrained sol­
ids. This pump is not designed to pump vol­
atile, explosive, or flammable materials. Do
not attempt to pump any liquids for which
you pump is not approved, or which may
damage the pump or endanger personnel
as a result of pump failure.
The electrical power used to operate this
pump is high enough to cause injury or
death. Make certain that the power cable re­
ceptacle is properly grounded before
installation. Make certain that the plug on
the pump power cable is disconnected from
its receptacle before servicing.
Never attempt to alter the length or repair
any power cable with a splice. The pump
motor and cable must be completely water­
proof. Injury or death may result from alter­
ations.
All electrical connections must be in accor­
dance with The National Electric Code and
all local codes. If there is a conflict between
the instructions provided and N.E.C. Speci­
fications, N.E.C. Specifications shall take
precedence. All electrical equipment sup­
plied with this pump was in conformance
with N.E.C. requirements in effect on the
date of manufacture. Failure to follow appli­
cable specifications, or substitution of elec­
trical parts not supplied or approved by the
manufacturer, can result in severe injury or
death and void warranty.
After the pump has been installed, make
certain that the pump and all piping or hose
connections are secure before operation.
Do not attempt to lift the pump by the motor
power cable or discharge hose. Attach
proper lifting equipment to the lifting device
fitted to the pump.
Pumps and related equipment must be
installed and operated according to all nation­
al, local and industry standards.