GORMAN-RUPP PUMPS SE Series, Инструкция по установке и эксплуатации

Страница: 10 / 14

SE SERIES
OM-06617
OPERATION 8
it to dry thoroughly. Run the pump for two or three
minutes to dry the inner walls.
If the pump freezes, move it into a warm area until
completely thawed, or submerge it into the liquid. If
the liquid is near freezing, the pump must be sub­
merged for an extended period of time. Start the
pump and check for shaft rotation. If still frozen, al­
low additional thawing time before attempting to
restart.
Do not attempt to thaw the pump by using
a torch or other source of flame. This could
damage gaskets, electrical components,
or motor windings.