Gorenje HPWW12, Инструкции по установке и запуску, Страница: 53 / 64

Water-to-water Heat Pump
53
(for example 4 – April), confirm the selection.
The currently selected DAY of month flashes.
Turn the +/- (E) main navigation knob to the selected day
of the month (for example 26) and confirm the selection
(the date of your return from holidays).
Turn the +/- (E) main navigation knob one increment to
the RIGHT. The item Operation Level: Freeze Protection
appears on the display.
This function is active only in Automatic operation mode!
Restart After Failure
In case of a failure caused by malfunction in the
operation of the heat pump, the warning ‘Error’ appears
on the display and the heat pump stops.
Check for the possible causes of failure (See Section:
Malfunctions).
After eliminating the cause of failure, press the (J)
RESET key. In 2 seconds, the operation of the heat
pump is restored. To erase the error messages press the
RESET (J) key.
After resetting the heat pump, all the original settings are
restored. Do not reset the unit during operation. In case
of repeated error messages, consult your service
provider.