Gorenje HPWW12, Инструкции по установке и запуску, Страница: 50 / 64

Water-to-water Heat Pump
50
Heating Switch Off
Characteristics of the Heating Switch Off:
Heating is switched off (automatic operation and
continuous operation mode in day and night operation);
the temperature of operation complies with freeze
protection operation mode (factory set temperature is
10
°
C), automatic change to Daylight Saving Time.
Preparation of Sanitary Water
In this Operation Mode, the temperature of sanitary
water is set.
Press the (B) key and switch on the preparation of
Sanitary Water mode.
The selected operation is indicated with an underline;
sanitary water is heated according to the selected
program.
Press the (B) key once again to switch off the
Preparation of Sanitary Mode. This means that once the
heated water is used up, it will not reheat again. Freeze
Protection is active, (See Section: Heat Pump Operation
Modes).
The temperature of sanitary water can be set in the
range of from 40°C to 55°C. Confirm each selection by
pressing the OK (D) key.
Press the OK (D) key and Time of Day and Date will
appear on the display.
Turn the +/- (E) main navigation knob to Sanitary Water.
Confirm the selection. The currently set temperature of
sanitary water (50°C) flashes. Turn the +/- (E) main
navigation knob to the selected new value (for example
45°C) and confirm the selection. Press the ESC (C) key