Instructions for Use, Building- in and Connecting
25
To facilitate positioning small dishes on the
burner grid, place the attached support extension
over the auxiliary burner
Cookware
Selection of the adequate dish size ensures
optimized cooking time and consumption of gas.
Diameter of the dish is of utmost importance.
The flame reaching over the edge of the
small
diameter dish
may destroy the dish, while the
consumption of gas is increased.
Gas needs oxigen for burning. In case of
excessively large dish diameter
the oxigen
supply is insufficient, consequently reducing the
burning capacity.
The wire grid
(certain models only)
The wire grid is used for dishes with small
diameter. Place the grid over the auxiliary burner
crown.
Burner type
Dish diameter
Large (3,0kW)
220-260 mm
Normal (1,9kW)
180-220 mm
Auxiliary (1,0kW)
120-180 mm
Triple-ring (3,5kW)
220-260 mm
Cleaning and maintenance
The appliance should be cleaned with warm
water, liquid detergent and soft cloth. Never use
aggressive cleaners and sharp objects. Burned or
dried food particles should be moistened with a
wet cloth and softened with an appropriate
cleansing agent.
Stainless steel surfaces must be cleaned with
special cleaners for stainless steel. Apply a fine
layer of the cleaner with a dry, well absorbing
cloth to the dried and cool surface, and rub in the
direction of the surface treatment. Stubborn
stains should be removed with wet cloth and then
rubbed dry with a dry cloth to the brilliance. Never
use such cleaners for cleaning of aluminum.
Cooktop burners
•
Gas grid, cooking area and burner components
should be cleaned with warm water and mild
detergent for manual washing of dishes.
•
Thermal element and ignition device should be
cleaned with soft brush. To ensure perfect
operation, these elements must always be
thoroughly clean.
•
Clean the crown and the crown cap. Always
keep the gas outlet nozzles on the burner
crown free of dirt.
•
Upon completion of cleaning wipe all
components dry and replace them carefully to
their respective slots.
Oblique position of
components may cause troubled ignition of
burners.
Note
! Crown caps are coated with black enamel.
Discoloration of caps, due to high temperatures,
is inevitable, but it has no adversary effect on
normal operation of burners.