Instructions for Use, Building- in and Connecting
28
Connecting the cooktop to the mains power
supply
Open the connector by means of screwdriver and
slightly push it downwards.
Electric connection may be carried out by
qualified service personnel only!
Wrong connection may permanently damage
parts of the appliance and render your
warranty void!
Prior the connection make sure the voltage from
the rating plate agrees with the existing mains
voltage supply. Mains voltage of the user (230 V)
must be verified with the measuring device!
•
Mains lead behind the cooker must be placed in
such manner to avoid touching the back panel
of the cooker because of the heat it develops
during operation.
•
The connection may be carried out by rubber
mains lead (type HO5RR-F with green/yellow
earth wire), PVC insulated mains lead (type
HO5VV-F with green/yellow earth wire) or other
cables of equal or better quality.
•
The mains lead extension may be prepared and
installed by qualified personnel only!
•
Any repairs of parts under tension may be
performed by qualified electrician. In case of
malfunction call the service personnel.
Connecting the cooktop to the gas supply
Safety precautions
•
The appliance must be connected in
accordance with the standing ragulations, and it
may be used only in well ventilated rooms.
Before any attempt to connect the appliance
read carefully the instructions!
•
Before installation and connection check if the
local connection specifications (type and
pressure of gas) correspond to the
specifications of the appliance.
•
The technical specifications of the appliance
are indicated upon the rating plate.
•
The appliance is not suitable for connection to
the vapour release channel (chimney). The
appliance must be installed and connected in
accordance with the standing regulations.
Special attention must be paid to the particular
ventilation requirements.
Connection
•
Connect the appliance in accordance with the
regulations of the local gas supplier.
•
Gas cooker is equipped with the EN ISO
10226-1 / -2 or EN ISO 228-1 (Depending on
the country-specific connection regulations.).
•
gas connection on the right side.
•
Appliance is supplied with the liquid gas
connection and non-metal gasket.
•
During connection hold the elbow R 1/2 to
prevent it from turning.
•
Use metal or non metal gaskets for connection
packing. Metal gaskets may be used only once.
Thickness of non-metal gaskets can be
deformed up to 25% maximally.
•
Connect the appliance to the liquid gas supply
by means of attested flexible hose.
•
The hose may not touch the bottom side of the
appliance, or the
•
back and the top of the oven.
•
If the kitchen element below the hob has an
integrated oven, it must be fi tted with the
cooling fan and the connection hose must
entirely be made of metal (for example flexible
stainless steel gas connection hose).
Connection hose must not touch the top oven
panel or the hob bottom.
Check sealing of all joints and couplings
after connection.
