Instructions for Use, Building- in and Connecting
24
Description of the appliance
Cooking burners are controlled by the relevant
control knobs. Heating power is indicated on the
knobs by the large flame symbol and the small
flame symbol.
Always turn the knob over the large flame
position towards the small flame position and
back. The operating position is always between
the two flame symbols.
Safety cautions in regard to the
cooking zones
•
Never use cooking zones without dishes, or for
heating the ambience!
•
Keep the cooktop clean, since dirt and stains
have adversary effect on the functionality of
burners.
•
If you like your food to be crisp, first set the
burner to the maximum and continue cooking at
minimum power.
•
Always provide adequate quantity of water
when cooking in the pressure cooker. Lack of
water may cause damage to the dish and to the
cooker.
•
Cooktop burners are thermally protected. If
the burner flame is accidentally
extinguished (spilled food, gust of wind) the
gas supply is automatically shut. There is
no possibility of gas escaping into the
room!
•
If the flame of thermally non-protected
cooking burners is accidentally
extinguished, the gas escapes into the
room!
•
Be very precise when placing the burner crown
cap upon the crown. Always keep the crown
nozzles clean and free.
crown cap
thermal coupling
(certain models only)
ceratin models only
burner crown
correct position of
burner components
Ignition and operation of burners
Gas burners may be ignited by means of electric
ignition spark plug, fitted adjacent to each burner
(certain models only).
Single handed ignition
(certain models only)
To ignite the burner, press the selected burner
button and turn it to the maximum power position
. Electric spark from the ignition device ignites
the gas.
If the ignition device is out of order, either due to
power failure or humid ignition device, use a
match or a lighter to ignite the gas.
•
Keep the button pressed for approximately 10
seconds after ignition to stabilize the flame.
•
If you failed to ignite the burner after 15
seconds, shut the burner off and wait for at
least one minute before the next attempt.
•
After that you can set the burning power
between high and low position to suit your
cooking requirements.
•
Button positions between
in
are not
recommended. In these positions the flame is
not stabilized and may be extinguished.
•
If the flame goes out repeat the procedure.
•
If the burner flame goes out (for whatever
reason), shut the burner off and wait for at least
one minute before next attempt.
•
Note: before igniting the burners (triple-ring
burner, double-ring burner, and Mini Wok)
cover them with appropriate cookware.
•
To shut the burner off turn the button to the
right, to the OFF position
(CLOSED).
Gas faucet is closed
Maximum power position
Minimum power position
