EN 17
If the force applied to close the door is
too strong, the efficiency of the system
can be reduced or the system's safety
can be affected.
DOOR LOCK
(depending on the model)
Open the door lock by gently pushing it to the right
with your thumb while simultaneously pulling the
door outwards.
When the oven door is closed, the door
lock automatically returns to the initial
position.
REMOVING AND REPLACING THE OVEN
DOOR
(depending on the model)
1. Open the oven door (up to end position).
2. Rotate the flaps of door hinges (in case of
conventional closing).
At COMFORT soft closing system, rotate the flaps
by 90°.
3. Slowly close the oven door until the flaps fit
together with the hinges in the side laths of the
door. At the angle of 15° (regarding to the closed
door position), slightly close the door and pull it
out from both hinges of the appliance.
Before replacing the door, always
check that the hinge flaps are correctly
placed in the side laths of the door.
You prevent the sudden closing of the
hinge so, which is connected to a
strong spring. The releasing of flap
causes the damaging of door and a
risk of injury.
Removing and replacing the oven door
(depending on the model)
1. Open the oven door (up to end position).
2. Raise up and turn the flaps.
3. Slowly close the oven door, lift it slightly and pull it
out from the both hinges of the appliance.
Provide these steps in reverse order at
returning the door back. If the door does not open or
close properly, make sure, that the hinges are
correctly located on their hooks.
REMOVING AND INSERTING THE OVEN
DOOR GLASS PANE
(depending on the model)
Oven door glass pane can be cleaned from the
inside, but it has to be removed first. Remove the
oven door (see chapter "Removing and replacing the
oven door".
Slightly lift the supports on the left and right side of
the door (marking 1 on the support) and pull them
away from the glass pane (marking 2 on the
support).