MAMUAL OPERATION
03
10.10.100.253
Admin( U)：
Password：
OK
CANCEL
Remember the password( R)
Device information
Firmware verison
MAC address
Wireless AP mode
SSID
IP address
Wireless STA mode
Router SSID
Encryption method
Encryption algorithm
Router Password
Start Setup
Cannot join the network, may be c aus ed by:
router doesn't exist, or signal is too week, or password is incorrect
Help:
Wizard will help you to complete setting within one mimute.
1.6.9.3.38.2.1.38
60:C5:A8:60:33:E1
E nable
Solar-WiFi
10.10.100.253
Dis able
WiFi_Burn-in
WAP/WAP2-PSK
AES
WiFi_Burn-in
Add wireless network manually
Network name (SSID)
Encryption method
Encryption algorithm
Pleas e enter the wireles s network pas s word:
Password (8-63 bytes)
show psk
Back
Next
W iF i-T es t
W PA/W PA2-PS K
AE S
hellogoodwe
Note:
case sensitive for SSID and password
Please make sure all parameters of wireless network are matched with router,
including password
Step 1
Step 2
Step 3
Back
Complete
Confirm to complete?
If you still need to configure the other pages of information, please
go to complete your required configuration.
Click 'Complete', the current configuration will take effect after
restart.
Configuration is completed, you can log on the Management page
to restart device by Click on 'OK' button.
Save success!
Please select your current wireless network:
SSID
Sec mode
Enc type
Channel
RSSI
WIFI Test
WAP2-PSK
AES
6
54%
Back
Next
Note:
When RSSI of the selected WiFi Network is lower than 10%, the
connection may be unstable, please select other available network or
shorten the distance between the device and the router.
If your wireless router does not broadcast SSID, please click "Next" and
add a wireless network manually.
3.2 PV MASTER APP OPERATION
PV Master is an external monitoring/ configuration application for
GoodWe hybrid inverters, used on smart phones or pad for both
Android and iOS system, main functions as below:
1. Edit system configuration to make the system work as customer
needs.
2. Monitor and check performance of the hybrid system.
3. Wi-Fi configuration.
Please download PV Master OPERATION INSTRUCTIONS from
https://en.goodwe.com/
Note:
1. Please make sure the password, Encryption Method/Algorithm is right the same with the router’s.
2. If everything is right well, the Wi-Fi LED on inverter will change from double blink to quartic blink then to
solid status, which means Wi-Fi is connected to GoodWe server successfully.
3. Wi-Fi configuration could also be done on PV Master, details please check on PV Master APP.
Note: Wi-Fi Reset & Reload function is only used when:
1. Wi-Fi lost connection to internet or cannot connect to PV Master APP successfully.
2. Cannot find “Solar-WiFi signal” or have other Wi-Fi configuration problem.
3. Please do not use this button if Wi-Fi monitoring works well.
3.3 CEI AUTO-TEST FUNCTION
PV Auto-Test function of CEI is integrated in PV Master APP for Italy safety country requirement. For
detailed instruction of this function please reger to PV Master Operation Instructions.
Wi-Fi Reset
Wi-Fi Reload
short press Reset button
Wi-Fi Led will blink for a few seconds
long press Reset button (longer than 3s)
Wi-Fi Led will double blink until doing
Wi-Fi configuration again.
3.1 WIFI CONFIGURATION
• This part shows configuration on web page.
• Wi-Fi configuration is absolutely necessary for online monitoring and after-sales maintenance.
PREPARATION:
1. Inverter must be powered up with Battery or grid power.
2. Need a router with available internet access to GoodWe portal
https://www.semsportal.com
1. Connect Solar-WiFi* to your PC or smart
phone(* means the last 8 characters of the
inverter serial No.)
2. Open browser and login 10.10.100.253
Admin (U): admin; Password: admin
3. Then click “OK”
1. Click “Start Setup” to choose your router
2. Then click “Next”
1. Fill in the password of the router, then
click “Next”
2. Click “Complete”
•Wi-Fi Reset & Reload
Wi-Fi Reset means restarting Wi-Fi module, Wi-Fi settings will be reprocessed and saved automatically.
Wi-Fi Reload means setting Wi-Fi module back to default factory setting.
18
17
Wi-Fi Reset Button
UPS
Wi-Fi
RESET
