GVC-2200-V Operation & Maintenance Manual
4.
Disconnect power cable from power supply socket.
5.
To disconnect the steam hose - press the red button on the underside of the steam
hose plug and gently pull the plug towards you.
6.
To disconnect the Vacuum hose from the Vacuum socket, turn counter-clockwise and
gently pull towards you.
7.
Place the accessories and the steam/vacuum hose in the intended spaces.
6. Application
6.1 General surface cleaning:
(use only low to medium steam)
Most surfaces can be cleaned using minimal steam, without cleanser. Utilizing the
vacuum option to quickly and effectively remove any liquid residue and debris leaving
the surface dry and without streaks.
6.1.1 Cleaning hard surfaces,
e.g. floor/wall tiles, stainless steel:
¾
Turn the steam regulator towards minimum (use little to medium steam).
¾
Do not apply pressure on the brush.
¾
Let the steam do the work.
¾
Move the brush slowly over the area to be cleaned; do not scrub.
¾
Use the vacuum where applicable to remove excess moisture and debris.
Waxed floors should not be cleaned with steam, due to the possibility of removal of the
wax layer!
Not appropriate for re-waxing !
6.1.2 Cleaning carpet stains
(use low to medium steam)
Do not use steam on Velour and wool carpets
Use caution with looped carpet tuft
Carpets and upholstery fabric’s are cleaned using the carpet and fabric cleaning tools.
Set the steam regulator to the lowest setting, then adjust the steam volume for the
required amount of steam to remove the dirt, grime and or grease. Always pull the tool
in your direction using a criss-cross pattern over the area being cleaned. The use the
vacuum to remove excess moisture and dirt or grease from the area just cleaned.
6.2 Cleaning
internal glass surfaces
(use low steam)
Do not attempt to clean glass surfaces other than those which are heat resistant. The
GVC-2200-V
is not suitable for external window cleaning.
GVC-2200-VVAC
Page 11 of 16
August 22, 2002
