goodnature EG-260 Grinder, Руководство пользователя

Страница: 15 / 34

15
35
GOODNATURE X-6 COMMERCIAL COLD PRESS JUICER
OWNER’S MANUAL
Section 4: Installation and Setup
4.5 SETUP - BAG KEEPERS
Fig 4.5: Threading the Rubber Cord Fig 4.6: Rubber Cord into Rack Slot
The two rubber cords included with the press keep the bags from falling out when the press is inverted for dumping the cake.
1
2
3
4
Rotate the press 90° so the bottom of the bags are at the top.
Start at one end and feed the cord through the hole in the end rack, through the grommet in the bottom of the first
bag, through the groove in the next rack and through the hole in the next bag. Continue threading the cord until the
other end rack is reached. (See Fig 4.5)
Pull the cord through the hole of the end rack and pull down tightly until the cord is firmly seated in the rack slot.
The tighter the cords are, the easier the dry cake will dump out when the press is rotated. (See Fig 4.6)
Rotate the press and repeat the steps to install the cord on the opposite side.