goodnature EG-260 Grinder Скачать руководство пользователя страница 5

Страница: 5 / 34

GOODNATURE X-6 COMMERCIAL COLD PRESS JUICER

OWNER’S MANUAL

Section 1:

Safety Precautions

DANGER: This machine is not intended for use by persons (including children) with reduced physical,

sensory, or mental capabilities, or lack of experience and knowledge, unless they have been given supervision

or instruction concerning use of the machine by a person responsible for their safety.

WARNING: Disconnect all power before performing maintenance to avoid risk of serious electric shock.

WARNING: Power must be supplied to the X-6 and EG-260 by a licensed electrician. Failure to do so may

result in serious personal injury due to electric shock or damage to the machine.

WARNING: Disconnect all power before moving the machine. Avoid damaging the power supply cord during

movement and use cautionary steps to avoid tipping.

WARNING: Be aware of all pinch points and moving parts and take precautions to keep loose clothing,

hair, or foreign objects away from them to avoid personal injury and damage to the machine.

WARNING: Electrical and mechanical repairs are not to be carried out by the operator unless

authorized to do so.

DANGER: Never place hands, arms, or any foreign items into the grinder hopper, grinder chute, or grinder

housing during operation. Personal injury including lacerations and amputations, or damage to the machine

can occur.

WARNING: Always check with your local health department regarding procedures required to ensure proper

cleaning and sanitation in order to avoid serious foodborne illness to consumers.

For the US: http://www.fda.gov/Food/default.htm

DANGER: Never place any body part between the platens while the machine is on. Failure to follow this

instruction could result in serious personal injury due to crushing.

WARNING: Discontinue use immediately and have machine serviced if any components are damaged or

malfunctioning to avoid risk of personal injury and damage to the machine.

Содержание EG-260 Grinder



































Результаты поиска

Содержание EG-260 Grinder

Отзывы:

Бренды по названию

Популярные бренды

goodnature EG-260 Grinder, Руководство пользователя

Результаты поиска

Содержание EG-260 Grinder

Отзывы:

Бренды по названию

Популярные бренды