Goodmans GTV32W3LCD, Руководство пользователя

Страница: 18 / 42

- 17 -
Manual Search:
In manual search, the channel number of
the multiplex is entered manually and only
that multiplex is searched for the channels.
For every valid channel number, signal level,
signal quality and network name are shown
at the bottom of the screen.
In both manual and auto search any existing
channel in the database is not re-stored to
avoid redundant duplicates of that channel.
FIRST TIME INSTALLATION
The user can use this item to load default
settings, which had been loaded to the re-
ceiver at the factory.
,QVWDOODWLRQ
$GG1HZ&KDQQHOV
)LUVW7LPH,QVWDOODWLRQ
To install factory settings, highlight “First
Time Installation” menu and press “SE-
LECT” button, then confirm deletion all chan-
nels and settings. Highlight “Yes” by using
or buttons and press “SELECT” button.
The existing channel table will be deleted.
<HV
<RXUSUHYLRXVGLJLWDOFKDQQHOOLVWZLOOEHGHVWUR\HG
$UH\RXVXUH\RXZDQWWRGHOHWHDOOGLJLWDOFKDQQHOV
DQGVHWWLQJVIRUILUVWWLPHLQVWDOODWLRQ"
1R
After factory settings are loaded, “ First Time
Installation ” menu will be displayed.
3OHDVHHQVXUHDHULDOLVSOXJJHGLQ'R\RX
ZDQWWRVWDUWILUVWWLPHLQVWDOODWLRQ"
<HV 1R
Press “SELECT” button whilst “Yes” is high-
lighted to start installation. After the channel
search is completed a message asking to
search for analogue channels appears on
the screen.
<HV
'R\RXZDQWWRVHDUFKIRU
DQDORJXHFKDQQHOV"
1R
Highlight “ Yes ” and press “SELECT” button
to search for analogue channels.The follow-
ing menu appears on the screen for ana-
logue channel search.
LQLWLDODSV
(QJODQG
RN!WRHQDEOH
SOHDVHFKHFNWKHDQWHQQDFDEOH
79!WRFDQFHO
ULJKWOHIWWRFKDQJHODQJXDJH
ODQJXDJH
FRXQWU\
DXWRVHW
HQJOLVK
Using or buttons, highlight the item to
adjust. Using or buttons adjust “lan-
guage” and “country” items.
Press “OK” button to start the autoset op-
eration when “ autoset “ item is highlighted.
FKDQQHOVHDUFKLQJ
SOHDVHZDLWRU
SUHVVPHQXWRFDQFHO
After APS is finalized, the programme table
will appear on the screen. In the programme
table the programme numbers and names
assigned to the programmes will be seen .
If the locations and / or the programme
names are incorrect they can be changed.
(See page 29 for Program table explana-
tion.)
Configuration
Press “ MENU ” button to display the Main
Menu and the button twice to highlight
Configuration , then press “ SELECT ” button
to display the Configuration menu. Press
“ MENU ” button to exit the menu.
0DLQ0HQX
&KDQQHO/LVW
,QVWDOODWLRQ
&RQILJXUDWLRQ
7LPHUV
/DQJXDJH
796HWXS
&RPPRQ,QWHUIDFH
ENG-3210W-17MB11-(UK IDTV)-1558UK-(WO DVI)-CHI MEI-50072184.p65 22.07.2005, 16:52 17