Connecting to a monaural TV set
9
TV set
(Continued on the next page)
To video input connector (yellow)
To audio input connectors (red, white)
Video/audio cable
It is recommended to connect a multi-system TV.
Ensure that this player and other equipment to be connected are set to the standby mode or off and disconnect the AC power
cords before commencing connection.
Do not block ventilation holes of any of the equipment and arrange them so that air can circulate freely.
Read through the instructions before connecting other equipment.
Ensure that you observe the color coding when connecting audio and video cables.
Note:
During DVD play, the TV volume may be at a lower level than during TV broadcasts, etc. If this is the case, adjust the volume to
the desired level.
If the DVD/VCD/CD player is connected to the TV through a video cassette recorder, the picture may not be played back
normally with some DVDs. If this is the case, do not connect the player via the VCR.
Connecting to a stereo TV set
Video/audio cable
To video input connector (yellow)
To audio input connectors (red or white)
Basic connection
