23
Once the initial programming is entered it is retained in
memory until changed, the player can always be operated
under the same conditions.
The settings will be retained in the memory until the
settings are changed even after setting the player to the
standby mode.
1. Press SETUP button.
2. Use the navigation buttons to select preferred item, then
press OK button, each screen for setting the value is
displayed.
3. Press SETUP button to close setup menu in any mode.
4. Use left navigation button to switch to another main setup
items.
Common procedure for initial settings
1.SYSTEM SETUP
2. LANGUAGE SETUP
LANGUAGE SETUP
LANGUAGE SETUP
OSD LANGUAGE
AUDIO LANG
SUBTITLE LANG
MENU LANG
EXIT SETUP
2.1 OSD LANGUAGE -
It is used to select different On Screen
Display language for different user.
Options:
select preferred audio language.(DVD
only, need disc software support)
Options:
Select preferred subtitle language.
(DVD only, need disc software support)
Options:
Select preferred disc menu language.
(DVD only, need disc software support)
Options:
ENGLISH
(The number of these options depends on the
customer's need.)
2.2 AUDIO LANG -
2.3 SUBTITLE LANG-
2.4 MENU LANG -
ENGLISH/SPANISH/PORTUGUESE/ITALIAN/
FRENCH/GERMN/DUTCH
ENGLISH/SPANISH/PORTUGUESE/ITALIAN/
FRENCH/GERMAN/OFF
ENGLISH/SPANISH/PORTUGUESE/ITALIAN/
FRENCH/GERMAN/DUTCH
3. AUDIO SETUP
AUDIO SETUP
AUDIO SETUP
AUDIO OUTPUT
EXIT SETUP
SYSTEM SETUP
SYSTEM SETUP
TV SYSTEM
PASSWORD
EXIT SETUP
TV TYPE
LCD MODE
Initial Settings
DEFAULT
ANGLE MARK
RATING
3.1 AUDIO OUT -
Set digital output code format.
Options:
If you are not connecting to an amplifier
via digital output, please select this option.
Used in general home theatre, select
this can output 5.1 channels audio.
Select this it can only output 2 channel,
but you will get higher quality audio output.
SPDIF/OFF:
SPDIF/RAW:
SPDIF/PCM:
- it is used to select the TV mode.
Options:
Please select this option as per your TV set.
Options: 4:3
16:9
it is used to select the TV scan mode, please
set as per your TV set.
Options:
Normal Pan & scan mode
normal Letter box mode
16:9 wide screen mode
- input password to unlock the
system. The steps are as follows:
1.4.1 Enter SYSTEM SETUP , select the PASSWORD item by
scrolling the down navigation button, and then press the
right navigation button to select the input box.
1.4.2 Input user's password"0000" to unlock it, in this case,
select the input box again to change the password by
inputting another new four numeric numbers and then
press SELECT button to confirm. When the password is
changed, you are needed to input the new one to unlock
the system.
1.4.3 Once you forget your own password, use the
supervisor's password "8200" to unlock it.
: If wrong password was input in unlock status, the
system will lock.
Set the rating of this player. If you want to
change the rating of parental lock, please input the
password to unlock first.
Options:
1.1 TV SYSTEM
NTSC / PAL/ AUTO
1.2
1.3 TV TYPE-
4:3PS :
4:3LB :
16:9 :
1.4 PASSWORD/CHANGE
NOTE
1.5 RATING -
1 KID SAFE / 2 G / 3 PG / 4 PG 13 / 5 PG-R / 6 R /
7 NC-17 / 8 ADULT
LCD MODE
- it is used to select the LCD mode.
1.6 Angle Mark
1.7 DEFAULT -
- it is used to select whether or not the
multi-angle icon is display on the screen when a
Multi-angle DVD disc is playing.
Reset to factory settings.
Options: RESTORE
