Gonotec OSMOMAT 050, Руководство пользователя

Страница: 3 / 51

Handbuch OSMOMAT 050 Seite 3 von 51
Version 1.1 (2011-10-12)
Notes, Safety Notices and Warnings
The symbols and abbreviations defined below may appear on the packaging material, on the serial
number plate or in the operating instructions:
In-vitro diagnostic device
This product meets the requirements of
EEC Directive 98/79 relating to in-vitro di-
agnostic devices.
Attention (refer to documentation)!
Please follow the safety notices in the
equipment operating instructions.
“Use by 4” The date that follows indicates
the expiration date as
year-month .
The name of the product batch follows.
REF
Article number or order number
The following pages provide a step-by-step introduction to using, maintaining and servicing the meas-
urement equipment. Passages requiring special attention are marked as follows:
This symbol warns of the danger of corrupt-
ing measurement results, for example, by
improper use of the measuring cell.
This symbol warns of the danger of damag-
ing the unit or the measurement system, for
example, as a result of improper servicing.
Subject to errors and technical changes.
The information contained in this document may be changed without prior notice.
© 2011 Gonotec Gesellschaft für Meß- und Regeltechnik mbH. All rights reserved.
Reproduction of this document in any form is permissible only with the prior written consent of Gonotec Gesellschaft für Meß-
und Regeltechnik mbH.
Trademarks used in this document:
GONOTEC and OSMOMAT are trademarks of Gonotec Gesellschaft für Meß- und Regel-
technik mbH.
Other trademarks and trade names used in this document may be trademarks or names of the corresponding companies or
their products. Gonotec Gesellschaft für Meß- und Regeltechnik mbH does not assert any claim to trademarks or trade names
other than its own.