Gonnheimer Elektronic DC 155, Руководство пользователя

Страница: 17 / 41

DC155 4 manual Page 17
Gönnheimer Elektronic GmbH phone.: +49 (6321) 49919-0, fax: -41 Email: info@goennheimer.de
3.3 Parameter input and Configuration
It is not necessary to read the following section, if you want to go ahead quickly.
Press the ENTER- key to start the access code input. The factory setting of the access code for entering the
main menu with access to the structure menu is "
0003"
. Confirm the access code with the ENTER- key.
3.4 Dosing control flow chart
The following flow chart depicts the dosing control process. Consider that pressing the "ENTER"- key and
entering the right code word will terminate this procedure in any state. After returning to the dosing operation
the procedure starts on the start position.
If you start the parameter or the structure menu while a dosing pro-
cess is running, the dosing is stopped immediately:
the valves close, the actual value is reset to "0".
Main menu
0. Language
1. Structure
2. Parameter
3. Codes
4. Reset sum counter
End