41
42
MONITOR DESCRIPTION
MONITOR CONNECTOR DESCRIPTION
onitor connector description.
M
a. Wall attachment hole (x4).
b. Monitor attachment hook (x2).
c. Vertical wiring input.
d. Attachment clip.
e. Wiring input hole.
f. Installation terminals:
a
a
b
b
f
e
d
c
Colocar la parte superior de la regleta a 1,60m. del suelo.
Place the top part of the monitor connector at 1,60m. from the floor.
50mm.
50mm.
Presionar para abrir.
Press to open.
onfiguration switches
C
.
On installation with one monitor only, set it as master; when
installations with two monitors, set as master the monitor where the door panel
is connected and the other monitor as slave.
Push button ring tone selection monitor, (for description see page 44).
Push button for intercom function (only available on systems with additional monitor,
for description and connection see page 44 y 45).
Regardless of the handset position, d
, activate the auxiliary device (see page 46).
During activation, the picture will disappear from the monitor screen.
It allows to visualize the video and the audio from the door panel during 40 seconds.
With the handset off the cradle, it allows to establish audio and video communication
with the door panel. In case of systems with two door panels, press the button again
to monitor the picture from the second door panel.
During call reception, communication and autoswitch-on processes, it allows lock release
activation. During activation, the picture will disappear from the monitor screen.
uring call reception, communication and
autoswitch-on processes
unction push buttons.
F
Master
SLAVE
P1+
P1-
P2+
P2-
3
2
1
Slave
The configuration switches are placed on the monitor base.
On installations with two monitors, set as slave the monitor that is not connected
the door panel.
IMPORTANT: On installations with two monitors, set as master the monitor where the door
panel is connected.
all volume control.
C
The monitor allows to regulate the volume of call with the switch of
three positions placed in the right side of the monitor.
Maximum: For a high volume, place the switch in the top position.
Medium: For a medium volume, place the switch in the medium position.
Mute: Without volume, place the switch in the low position. If the monitor ring tone is
muted and a call is made on the door panel, the picture will appears on the
monitor; to establish audio communication pick up the handset.
..
: Positive.
: Ground.
P1+: Connection to door panel1.
P1 :
.
P2+:
2.
P2 :
2.
3 : Intercom.
2 : Intercom.
1 : Intercom.
: Ground.
Connection to door panel1
Connection to door panel
Connection to door panel
Note:
To connect one or two door panels (see page 45).
To connect "Intercom" between two monitors (see page 45).
_
_
+
_
_
