Villa
1
2
Villa
1
2
Villa 1
28
Communication screen
Start or end audio communication with the displayed door panel. The communication has a
maximum duration of 90 seconds.
In the "Push to talk" communication mode, keep it pressed while talking and release to listen.
Change the source of the image. This icon appears in case the system has more than one door panel
or has an external camera connected, and has been configured in the basic settings of the monitor
(pages 23 to 25). It is possible to change the source during the visualization and communication
processes.
Press to start recording a video. To end the recording, press the icon again.
Enables or disables the audio coming from the door panel during the viewing process. The
initial state depends on the monitor preview settings (page 25).
Activate or deactivate the phone's microphone during the communication process. In the
communication mode "Push to talk" is deactivated.
Takes a snapshot picture.
2018-06-13 17:45:39
2018-06-13 17:45:39
Door panel 1
Door panel 1
1
2
Push to talk
Villa
2018-06-13 17:45:39
Door panel 1
SOUL S5110/ART 7W VIDEO INTERCOM KIT
G2Call APP
If you have activated the call transfer on the monitor and the notifications are activated in the application, you will
receive the calls made on the entrance panel. A pop-up screen will show you the origin of the call. You can
accept the call through the
icon, or reject it by pressing
. Once the call is accepted, you can establish
audio communication by pressing the icon
.
Whether you access the communication screen via a call reception or access from the main screen, the options
detailed below will be the same.
All manuals and user guides at all-guides.com
