3
SYSTEM OPERATION
To make the call, the visitor must press the corresponding button to the apartment with which he wishes to establish
communication; an acoustic tone will warn that the call is being made and the led will light up. At that moment, the
monitor (s) of the apartment receives the call. If the pushbutton of another apartment has been pressed by mistake,
press on the one that corresponds to the desired apartment, thus canceling the first call.
In systems with two access doors, the other door panel will be automatically disconnected: if another visitor wishes to
call, some acoustic tones will warn that the system is busy and the led will light up.
Upon receiving the call, the image will appear on the main monitor screen (and secondary 1, if any) without the visitor
perceiving it. If you want to view the image from the secondary monitors 2 or 3, click on the screen to display the
image. If the call is not answered within 30 seconds, the led will turn off and the system will be free.
If the call transfer was programmed to your mobile phone, you can cancel the transfer at any time from the monitor,
being necessary to contact the door panel from the main menu.
To establish communication, click on the screen on the off-hook icon. The led on the door panel will light up. The
communication will last for 90 seconds or until you click on the hanging icon. Once the communication is complete,
the led will turn off and the system will be free.
To open the door or activate the auxiliary output of the door panel, click on the corresponding icon. A single press
activates the lock release or the auxiliary output for 3 seconds, and the led on the door panel illuminates. The
activation time is programmable, as indicated on pages 35 to 36.
The detailed operation of the monitor is described on pages 11 to 21.
The owner of the apartment can activate the lock release by approaching the proximity key to the reader. If the
proximity key is maintained for three seconds, the auxiliary relay output will be activated.
RECOMMENDATIONS
- Use, preferably, Golmar
RAP-GTWIN / HF
cable (2x1mm²).
- Installation wires must be at least
40cm away of any other installation.
- When modifications are made to the installation,
do so without power.
- The installation and handling of this equipment must be carried out by
authorized personnel.
- Check all connections before system start up.
- Follow the instructions in this manual at all times.
SOUL S5110/ART 7W VIDEO INTERCOM KIT
All manuals and user guides at all-guides.com
