JAZZ GB2 VIDEO DOOR ENTRY SYSTEM KIT - HOUSE
INTRODUCTION
First of all, we thank and congratulate you for purchasing this product.
Our commitment to achieving the satisfaction of customers like you is manifested through our ISO-9001 certification
and the manufacture of products like the one you have just purchased.
Its advanced technology and strict quality control will ensure that customers and users enjoy the numerous features
that this device offers. To get the most out of them and ensure proper operation from day one, we recommend that you
read this instruction manual.
CONTENTS
2
SET-UP WARNINGS
-
Do not overtighten the screws on the power supply connector.
-
Always disconnect the power supply
before installing or making modifications to the devices.
-
The fitting and handling of these devices must be carried out by
.
authorised personnel
-
The wiring must run at least
.
40cm away from any other wiring
-
Before connecting the device to the mains, check the connections between the door panel, power supply unit,
distributors, camera interface, GSM interface and monitors.
-
Use the Golmar
cable (2x1mm ).
RAP-2150
2
-
Always follow the instructions contained in this manual.
Introduction
....................................................................................................................................................................2
Contents
.......................................................................................................................................................... .............2
.
.
Set-up warnings
............................................................................................................... .................2
.............................
Safety precautions
.................................................................................................................... ........................3
.............
.
Characteristics and functioning of the system
.................................................................................................... .........3
....
Description of JAZZ surface panel (with proximity reader)
............................................................................ ........ 4
..........
.
Exploded view of the parts of the panel
.................................................................................................................... ....5
...
.
Description of the TK3401/GB2 proximity access key kit
........................................................................... ......... 5
............
.
Door panel
............................................................................................................................................................ .........
...
................................................................................................................................ ..........5
..
.
Location of the door panel
................................................................................................................................. ........6
....
Removing the metal front
................................................................................................................................ ......... 6
..
.
Positioning the door panel
......................................................................................................................................... ........6
..
Wiring the door panel
.............................................................. ..........................7
......................
Codes assigned to the door panel call buttons
................................................................................................ ........ 7
...............................
Description of the DIP switch
................................................................................................... .................8
....
Description of the configuration jumper
................................................................... .........8
................
.
Description of the illumination LEDs (low light conditions)
.................................................................................................. ...8
...
Description of the visual signals on the door panel
.............................................................................................. .............8
..
Setting the door panel communication volume
.................................................................................... .................9
.............................
Setting ringtone operating mode
........................................................................................... . 9
...
.
Setting door panel mode with or without shield installed
................................ ............... 9
...........
.
Setting contact mode for CV-/CV+ (lock release) and C1/NA1 (auxiliary device)
.................................... ..... 10
........
.
Setting the activation time for CV-/CV+ (lock release) and C1/NA1 (auxiliary device)
...................................................................... ..............10
....................
Setting card reader illumination operating mode
.......................................................................... ...10
.....................
Setting door panel illumination LED operating mode
........................................................................................................................ .........11
..
Setting the door panel address
........................................................................................................................... .... 11
..
Positioning the nameplate label
.................................................................................... .........11
.....................
Positioning the button identification labels
........................................................................................... ......... 12
........
.
Managing the access keys (proximity reader)
..................................................................................................................................... .......13
...
.
Closing the door panel
Installing the power supply unit (FA-GB2/A) and lock release
......................................................................... .............14
..
Wiring diagrams with the PENTHA monitor
............................................................................................ ....... 15-20
..........
.
Connection diagrams for up to 4 access panels
.................................................................................... ................... 21
.....
Connection diagrams with AC lock release, 2nd AC lock release or automatic gate
.................. ............22
.........................
N
...........................................................................................................................................................................23
otes
