golmar Jazz GB2 Скачать руководство пользователя

Страница: 10 / 24

INSTALLATION OF THE DOOR PANEL

Setting the activation time for CV- and CV+ (lock release) and C1 and NA1 (auxiliary device):

To change the activation time for the lock release and auxiliary device, follow these steps:

See p. 7.

In the configuration DIP switch, set DIP 1 to ON, DIP 2 to OFF and DIP 3 to ON.

The card reader illumination will blink slowly.

Then press and hold down call button P2; LED will blink indicating with each blink 1 second and also a tone

will indicate every time it is heard 1 second for the activation time.

Note: (From 1 to 99 seconds).

Once the desired activation time is configured, set DIP 3 to OFF and the door panel will exit

configuration, saving the setting.

Note:

Remember to configure the address of the door panel.

Important:

The time configured will be for both the lock release and the auxiliary device.

Setting card reader illumination operating mode:

To configure the card reader illumination operating mode, follow these steps:

See p. 7.

In the configuration DIP switch, set DIP 1 to OFF, DIP 2 to ON and DIP 3 to ON.

The card reader illumination will blink slowly.

Then with the P1 call button, each press selects a different option and in carousel mode:

If pressed once: Card reader always illuminated (factory setting).

LED illuminates and the door panel emits a long tone.

If pressed

: Card reader always off.

a 2nd time

LED illuminates and the door panel emits two

tones.

short

If pressed

time: The card reader automatically turns on or off depending

a 3rd

on the ambient light (day/night mode).

LEDs and illuminate and the door panel emits three

tones.

short

Once the required option is selected, stop pressing P1. Then set DIP 3 to OFF and the door panel will exit

configuration, saving the selected option.

Remember to configure the address of the door panel.

Note:

Setting door panel illumination LED operating mode:

To configure the door panel illumination LED operating mode, follow these steps:

See p. 7.

In the configuration DIP switch, set DIP 1 to OFF, DIP 2 to ON and DIP 3 to ON.

The card reader illumination will blink slowly.

Then with the P2 call button, each press selects a different option and in carousel mode:

If pressed once: Illumination LEDs always activate when a call is made from the door panel.

LED illuminates and the door panel emits a long tone.

If pressed

: Illumination LEDs always off.

a 2nd time

LED illuminates and the door panel emits two

tones.

short

If pressed

: Illumination LEDs activate when a call is made and door panel

a 3rd time

illumination at that moment is low (factory setting).

LEDs and illuminate and the door panel emits three

tones.

short

Once the required option is selected, stop pressing P2. Then set DIP 3 to OFF and the door panel will exit

configuration, saving the selected option.

Remember to configure the address of the door panel.

Note:

JAZZ GB2 VIDEO DOOR ENTRY SYSTEM KIT - HOUSE

Содержание Jazz GB2

























Результаты поиска

Содержание Jazz GB2

Отзывы:

Похожие инструкции для Jazz GB2

Бренды по названию

Популярные бренды

golmar Jazz GB2, Руководство пользователя

Результаты поиска

Содержание Jazz GB2

Отзывы:

Похожие инструкции для Jazz GB2

Бренды по названию

Популярные бренды