8
7. The Console (3) requires four D batteries (not
included); alkaline batteries are recommended.
Do not use old and new batteries together or
alkaline, standard, and rechargeable batter-
ies together.
IMPORTANT: If the Console has
been exposed to cold temperatures, allow it
to warm to room temperature before insert-
ing batteries. Otherwise, you may damage
the console displays or other electronic
components.
Remove the battery cover and
insert the batteries into the battery compartment.
Make sure to orient the batteries as shown by
the diagram inside the battery compartment.
Then, reattach the battery cover.
3
Battery
Cover
Batteries
7
8
3
Console
Wire
Ground
Wire
8. While another person holds the Console (3) near
the Upright (2), connect the console wire to the
Extension Wire (39). Then, connect the console
ground wire to the Ground Wire (80)
Insert the excess wire into the Upright (2) or into
the Console (3).
Tip: Avoid pinching the wires.
Attach the
Console (3) to the Upright (2) with four M4 x
16mm Screws (77).
Avoid pinching
the wires
2
77
39
80
