6
65
1.
Attach the Front Stabilizer (19) to the front of the
Frame (1) with two M10 x 78mm Patch Screws
(65).
19
1
1
2. Attach the Rear Stabilizer (60) to the Frame (1)
with five M10 x 22mm Patch Screws (4).
60
1
4
4
4
2
3. Loosen the Seat Knob (29) a few turns. Next,
pull the Seat Knob outward, insert the Seat Post
(6) into the Frame (1), and then release the Seat
Knob.
Move the Seat Post upward and down-
ward slightly to make sure that the pin on the
Seat Knob is engaged in one of the adjust-
ment holes in the Seat Post.
Next, push the Seat Guide (46) downward into
the top of the Frame (1). Attach the Seat Guide
with an M4 x 4.5mm Patch Screw (70). Then,
retighten the Seat Knob (29).
3
6
1
46
70
To make assembly easier, read the
information on page 5 before you begin.
29
