10
12.
Make sure that all parts are properly tightened before you use the exercise bike.
Note: After assembly is
completed, some extra parts may be left over. Place a mat beneath the exercise bike to protect the floor.
11
23
26
68
11. Remove the 1/2" Pedal Nut (68) from the shaft of
one of the Pedals (23).
See the lower drawing.
Make sure that there is a Custom Washer (86), a
Pedal Spring (42), a Blue Washer (71), a Pedal
Bushing (43), a Black Pedal Washer (79), and
a Pedal Spacer (44) on the shaft of the Pedal.
In addition, make sure that the Pedal Bushing is
oriented as shown.
Firmly tighten the shaft of the Pedal (23)
clock-
wise
into the right Crank Arm (26). Then, tighten
the 1/2" Pedal Nut (68) onto the shaft.
Attach the other Pedal (not shown) in the
same way. Firmly tighten the Pedal coun-
terclockwise into the left Crank Arm (not
shown).
23
68
42
71
43
79
44
86
