GOLDMUND MIMESIS 11 – WIRELESS HUB - 5
1
SETTING UP THE MIMESIS 11 HUB (Ctd.)
1.3
CHOICE OF THE MIMESIS 11HUB LOCATION
Select a very rigid support, as required for your player transport.
The distance between the Mimesis 11 Hub and the power amplifier or active speaker is
usually not critical since the signal is carried in the digital domain. However, you must use
coaxial links of highest quality such as the Goldmund lineal in order to maintain the time
accuracy and are highly recommended, especially for long distances.
For wireless audio link depends on several factors, such as the amount of WiFi equipment
used in proximity of the Mimesis 11 Hub, as well as the building materials and the
architecture of the room.
Depending on the above mentioned factors, the maximum range will normally be from 5 to
20 meters.
If you want to achieve the best possible sonic result, select an opposition on a shelf or on a
piece of furniture where the Mimesis 11 Hub
is isolated from vibrations of mechanical
components, including the player transport itself.
1.4
POWER SUPPLY
The Goldmund Mimesis 11 Hub uses an internal power supply developed by Goldmund to
provide totally separate voltage between the USB part and the digital/analog circuitry.
Your unit has been set to operate with the mains voltage of your area. Check on the power
supply voltage switch on the rear panel if there is any doubt. If you move after purchasing
the Mimesis 11 Hub to an area using a different AC mains voltage, you can change the
voltage yourself or consult your local Goldmund dealer for assistance in doing so.
The voltage selector on the rear panel allows choosing between 220V (234V nominal) and
110V (117V nominal). In case the nominal line voltage in your country is out of range,
please consult your local Goldmund dealer for assistance.
The power supply unit can operate indifferently with both 50 and 60 Hz AC line.
