background image

 

I. INTRODUCTION 

 
Congratulations  on  the  purchase  of  your  new  LiteRider 

® 

Envy  Lite.  The  LiteRider 

®   

Envy 

Lite,  combines  cutting  edge  technology  with  attractive  designs  that  are  also  highly            
functional in today’s world. We at Golden Technologies, Inc. know that you have chosen 
a power chair that will give you years of dependable operation and also will enhance the 
quality  of  your  life  by  providing  you  with  the  mobility  to  experience  an  active  daily           
lifestyle.  
 
Even  though  your  new  LiteRider 

®  

Envy  Lite  is  both  user-friendly  and  designed  for      

maximum  maneuverability  in  even  the  tightest  spaces,  we  ask  that  you  please  read,                  
understand and follow all of the instructions and suggestions in this manual before you 
operate your power chair for the first time. The safe use of your new power chair is very 
important to us.  
 
If you feel that you do not understand the instructions and suggestions presented in this 
owner’s manual, or if, for any reason, you do not feel capable of performing the activities 
necessary  to  assemble,  disassemble,  operate,  or  maintain  your  LiteRider 

®  

Envy  Lite

please contact your local Golden Technologies, Inc. provider or call Golden Technologies, 
Inc. Technical Support Services at (800) 624-6374.  
 
Golden  Technologies,  Inc.  cannot  be  held  responsible  for  personal  injury  or  property 
damage  resulting  from  the  unsafe  or  the  improper  use  of  any  of  our  personal  mobility 
products. Also, Golden Technologies, Inc. cannot be held responsible for personal injury 
or  property  damage  resulting  from  attempts  to  follow  instructions,  suggestions,  and 
guidelines presented in this owner’s manual.  
 
Our  Research  and  Development  Department,  our  Quality  Control  Department,  and  our 
Engineering  Department  have  used  the  latest  product  specifications  and  the  latest   
product  design  information  to  manufacture  your  LiteRider 

® 

Envy  Lite.  Golden          

Technologies, Inc. reserves the right to implement changes into our product lines when 
those  changes  become  desirable  or  necessary.  If  changes  are  implemented  into  our           
product line, there may be minor differences between the product you purchased and the 
illustrations and instructions in this owner’s manual.  
 
Please  fill  out  and  mail  the  enclosed  warranty  registration  card.  Registration  is  also  
available  @  www.goldentech.com.  We  at  Golden  Technologies,  Inc.  would  appreciate 
hearing about the dependability of your LiteRider 

®  

Envy Lite and about the convenience 

of  mobility it has provided for you. We would also appreciate hearing about the service 
you received from your local Golden Technologies, Inc. provider or representative. 
 
Golden Technologies, Inc.                                                            Phone: (570) 451-7477 
401 Bridge Street                                                                        Fax: (570) 451-7494                                          
Old Forge, PA 18518                                                                   Toll free: (800) 624-6374 
 
For  more  information  about  our  products  and  services  or  to  send  us  your  comments, 
please visit our website at 

www.goldentech.com

                  

 

 

Содержание Envy Lite GP161











































Отзывы: