background image

Pelvic Support

Pelvic Belts

The

Stealth Positioning™

line of pelvic belts, vests, chest straps and foot positioners are

intended to help wheelchair users attain proper alignment of the torso, pelvis and feet.
Comfort, stability and improved clinical posture are achieved through the use of breathable
material and structured support.

Pelvic positioning impacts all aspects of proper seating and safety.

Pelvic positioning

systems are placed in front of the client’s pelvis to maintain a neutral position (to the degree
possible for each client). A properly positioned pelvic support may:

Help stabilize the pelvis, which directly affects seated body alignment;

Aid in the prevention of sacral sitting, unsafe and non-functional postures, skin breakdowns,
and increased pressure on bony prominences;

Increase postural stability, decreasing the effort needed to sit;

Facilitate posture, allowing an increase in upper extremity movement;

Contribute to proper head positioning and neck alignment; and,

Reduce negative postural tendencies that can lead to orthopedic deformities and other
secondary medical complications.

Intended Use

Summary of Contents for Stealth Positioning Pelvic Belts

Page 1: ...ient s pelvis to maintain a neutral position to the degree possible for each client A properly positioned pelvic support may Help stabilize the pelvis which directly affects seated body alignment Aid in the prevention of sacral sitting unsafe and non functional postures skin breakdowns and increased pressure on bony prominences Increase postural stability decreasing the effort needed to sit Facili...

Page 2: ...seat rail Thread the belt around the wheelchair tube in the correct location as shown above Thread the belt around the wheelchair tube in the correct location as shown above Tri end is attached using a fastener and a hole in the seat rail then thread the belt through the Tri end and D Clip as shown above NOTICE Ensure that the webbing is routed properly through the belt anchor and does not slip wh...

Page 3: ...logo on the buckle housing This will disengage the locking mechanism Step 2 Pull gently on the male side of the buckle while holding the push button It should release and separate from the housing Make any adjustments to the belt as necessary Step 3 To reattach the buckle slide the male side of the buckle back into the housing A audible click should occur indicating that the belt is secure If the ...

Page 4: ...n with the expressed intent of use with standard configurations They also contain important safety and maintenance information For assistance with advanced configurations or options contact your provider or Stealth Products at 512 715 9995 or toll free at 800 965 9229 Immediately discontinue use if any function is compromised if parts are missing or loose or if any component shows signs of excessi...

Reviews: