GOLDEN LITERIDER Envy Lite GP161, Руководство пользователя

Страница: 32 / 42

32
IX. CARE AND MAINTENANCE
ROUTINE MAINTENANCE
Your power chair requires a minimal amount of care and maintenance. If you do not feel
confident in your ability to perform the maintenance listed below, you can schedule an
inspection and maintenance with your provider.

Make sure your batteries are fully charged daily. See “Battery Charging”.

While turned off, check the joystick control daily for damage, and make sure it returns
to the neutral position. If any defects are observed, contact your provider. Do not
attempt to repair it yourself!

Inspect the seating system, armrests, footplate, and front riggings daily for loose
hardware, excessive wear, or damage. If any defects are observed, contact your
provider.

Regularly inspect your power chair’s tires for signs of wear.

Regularly inspect all exposed harnessing and connections for wear, damage, and
corrosion. Have your provider repair or replace any damaged harness or connector.
 Keep all the electrical components (charger, joystick control, and electronics) free from
moisture. If any of these items do become exposed to moisture, let them dry
thoroughly before attempting to operate your power chair again.

Periodically check all fasteners for tightness, wear, and corrosion. If any of these are
present, turn off the power chair and contact your provider.
Be careful of pinch points and sharp metal parts (wear gloves).

All wheel bearings are permanently lubricated and sealed. No additional lubrication is
required.
CLEANING
Body: Clean the body of your power chair with a damp cloth. Use a cool water mixed with
a mild soap to remove dirt and oils. Dry with a clean soft cloth. Buff by hand with a soft
cloth.
Do not use free-flowing water to clean your BUZZTMABOUT.
Tires: Clean the tires with ordinary kitchen-type cleaners and a damp cloth. Do not use
solvents on the tires. Solvents can cause the tire material to break down or become too
soft.
Vinyl Seat
Clean with a mild soap or mild detergent and a damp cloth. A vinyl cleaner may also be
used.
Never use Armor All type products on the floor, seat, or tires of your
scooter. These types of cleaners cause the surface being treated to become very
slippery, causing a potential slip/fall hazard.