GOLDEN LITERIDER Envy Lite GP161 Скачать руководство пользователя | Manualshive

Страница: 11 / 42

background image

11

III. EMI/RFI

The  rapid  development  of  electronics,  especially  in  the  area  of  communications,  has
saturated  our  environment  with  electromagnetic  (radio)  waves  that  are  emitted  by
television transmitters, cellular phones, citizen’s band radios (CBs) amateur radios (HAM
radios), wireless computer links, microwave transmitters, paging transmitters, etc. These
electromagnetic (EM) waves are invisible and increase in strength the closer one gets to
the  source  of  transmission.  When  these  energy  waves  act  upon  electrical  devices  and
cause them to malfunction or to function in an erratic or uncontrolled manner, they are
referred to as Electromagnetic Interference (EMI) or Radio Frequency Interference (RFI).

EMI/RFI AND YOUR LiteRider

®

Envy Lite

All electrically powered vehicles, including power chairs are susceptible to EMI/RFI. This
interference could result in abnormal or unintended movement of your Golden LiteRider

®

Envy Lite.

Unintended movement or brake release could cause an accident

or injury.

The FDA has determined that each make and model of power chair can resist EMI/RFI to
a certain level. The higher the level of immunity, the greater the degree of protection from
EMI/RFI measured in volts per meter (V/m). The FDA has also determined that current
technology is capable of providing 20 V/m of immunity to EMI/RFI, which would provide
useful protection against common sources of interference. This product has been tested
and has passed an immunity level of 20 V/m.

EMI/RFI RECOMMENDATIONS

PROHIBITED! Do not turn on or use hand-held personal electronic

  communication devices such as cellular phones, walkie-talkies, or CB
  radios while your power chair is turned on.
• Be aware of any nearby transmitters (radio, television, microwave, etc.) on your
intended route and avoid operation your of power chair close to any of those
transmitters.
• Turn off the power if your LiteRider

®

Envy Lite is going to be in a stationary position for

any length of time.
• Be aware that adding accessories or components or modifying your power chair may
make it more susceptible to EMI/RFI.
• If unintended movement or brake release occurs, turn your power chair off as soon as
it is safe to do so.
• Report all incidents of unintended movement or brake failure to your Golden
Technologies representative or to Golden Technologies.

Turn off your power chair as soon as it is safely possible if

unintended or uncontrollable motion occurs or if unintended brake release occurs.

«
...
9
10
11
12
13
...
»

Содержание Envy Lite GP161











































Отзывы:

Нет отзывов

Похожие инструкции для Envy Lite GP161

Бренд: Neatech Страницы: 36

Rigid Aero Z Series

Бренд: TiLite Страницы: 102

Бренд: Sizewise Страницы: 17

NUVO GLIDEABOUT MOBILE COMMODE

Бренд: NRS Страницы: 2

Бренд: Glide Страницы: 13

Бренд: Vermeiren Страницы: 136

Standard Cushion

Бренд: SafeLife Страницы: 13

Бренд: Magic Mobility Страницы: 28

Бренд: LEADING CHAIR Страницы: 2

Бренд: Mobiak Страницы: 7

Бренд: AAT Страницы: 32

Бренд: Vitea Care Страницы: 19

Бренд: Vitea Care Страницы: 23

MULTIPLUS DRVI0M

Бренд: Vitea Care Страницы: 48

DYNAMIC MONO BACKREST SYSTEM

Бренд: Sunrise Medical Страницы: 2

Бренд: Sunrise Medical Страницы: 28

Empulse WheelDrive

Бренд: Sunrise Medical Страницы: 48

Бренд: Sunrise Medical Страницы: 52

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды