Operating Your Dehumidifier
PROOF OF PURCHASE
To receive warranty retain receipt as proof of purchase.
SAFETY DEVICES
This appliance has two protection devices:
•
Resettable Thermal Link - this will automatically disconnect the power to the
appliance at a pre-set overheat temperature. After cooling down it will reset and
power on again. If this occurs, investigate what is causing the appliance to
overheat.
•
Thermal Fuse - this disconnects the appliance permanently in case of overheating.
(It is non resettable).
CARE AND CLEANING
•
The dehumidifier requires regular cleaning to ensure trouble free operation:
•
Unplug the dehumidifier from the mains supply before cleaning.
•
Ensure that the dehumidifier has been allowed to cool down completely before
cleaning.
•
The common cause of overheating is deposits of dust or fluff in the appliance.
Ensure these deposits are removed regularly by unplugging the appliance and
vacuum cleaning the air vents and grills.
•
Use a damp cloth (not wet) to wipe the exterior of the dehumidifier to remove dust
and dirt.
•
Never use solutions such as petrol, thinners or polishing agents.
•
Ensure the dehumidifier is dry before plugging back into the mains supply.
•
Do not attempt to dismantle the dehumidifier.
•
There are no user serviceable parts. For service or repair, contact an authorised
electrical service technician.
SUPPORT AND TECHNICAL ADVICE
Goldair
–
New Zealand
Monday
–
Friday 8am-5pm
Phone +64 (0)9 917 4000
Phone 0800 232 633
[email protected]
Goldair
–
Australia
Monday
–
Friday 8am-5pm
Phone +61 (0)3 9365 5100
Phone 1300 465 324
