![background image](http://html1.mh-extra.com/html/goldair/gbq15/gbq15_operating-instructions-manual_2240100011.webp)
LIGHTING INSTRUCTIONS
1.
Ensure the regulator is properly secured into the burner end.
2.
Ensure the propane cylinder is tightly threaded into the regulator (hand-tighten only).
If using an LPG gas bottle as your fuel supply, ensure the regulator hose is tightly
threaded onto the regulator and gas bottle connection.
3.
Open lid.
4.
Locate either of the lighting access holes on the right side of the panel.
5.
Insert a match or lighter through the access hole next to the burner tube. For safety
and to avoid burns we recommend a match is inserted into the end of the lighting
rod which can be inserted through the access hole to light the burner tube.
6.
While holding the flame in position, push the regulator control knob “IN” and turn
counter-
clockwise to “LOW” position.
7.
If ignition doesn’t occur within 3-5 seconds, turn the gas supply off. Wait 5 minutes
and repeat the lighting procedure.
If the BBQ fails to light at the second attempt, check with your local dealer for assistance.
With the burner lit, gently close the lid and allow BBQ to warm up for 15-20 minutes prior
to use.
Flames should be blue and stable with no yellow tips, excessive noise or lifting. If
any of these conditions exist, check to see if the air shutter or burner ports are
blocked by dirt, debris, spider webs, etc.
1. Locate the lighting rod on the
right side of your
BBQ.
Lighting Rod
2. Attach the match to the front
end of the lighting rod, and stick
the lighting rod into the access
to manual lighting hole to light
the BBQ.
Access to manual
lighting
Содержание GBQ15
Страница 6: ...KNOW YOUR PORTABLE BBQ...