Designer Holding Cabinet
Model Series: 5510, 5511, and 5512
Page 6
gmpopcorn.com
4.
Doorknobs are shipped facing the inside of machine. Re-adjust knobs to face the
outside of machine.
5.
Make sure air ducts are in place before installing racks, see Air Duct Installation
instructions below.
6.
Install racks
—
make sure the rack sits on the shelf support for each corner post.
7.
After setup, unit should be cleaned prior to use (see Care and Cleaning section).
Black
Crutch Tip
Glide
(pre-installed
at the factory)
Rubber Feet Installation
General images shown for reference only
(model sizes vary).
Readjust knobs to
face outward.
Shelf supports
located on each
corner post.
Air Duct Installation:
a. Insert top of air duct under the
ceiling tab.
Side flanges of the air duct must
face the glass.
b. Slide bottom end towards glass.
Make sure the air duct clears the
shelf brackets on the corner posts.
a
b
