Designer Holding Cabinet
Model Series: 5510, 5511, and 5512
Page 8
gmpopcorn.com
OPERATING INSTRUCTIONS
Controls and Their Functions
LIGHTS SWITCH
Two position, lighted rocker switch - provides power to the interior cabinet lighting and to
the sign. The green light ON indicates there is power to the lights.
HEAT SWITCH
Two position, lighted rocker switch - provides power to the blower and Digital Heat
Control. DO NOT operate unit if blower is not working (see Troubleshooting section).
DIGITAL HEAT CONTROL (Digital Display)
Controls the cabinet temperature (cycles the heat element OFF/ON during operation, as
needed)
—
the heat switch must be on for the control to turn on.
Operating Instructions
1.
Turn Lights and Heat Switch ON.
2.
Set unit temperature for one of the uses below (see Adjusting the Set Temperature).
To hold potentially hazardous foods (volatile foods)
—
the control MUST be set
to 160°F (72°C).
Note:
Do not use for cheese cups when set above 140°F (60°C).
To hold Portion Pak Cheese Containers/prepackaged non-volatile foods
—
set
the control to 140°F (60°C).
DO NOT use for open volatile food products when set below 160°F (72°C).
Important:
The control displays the air temperature in the cabinet.
The actual
product temperature may be lower or higher than the displayed
temperature depending on how long it has been heated.
For specific product safe food holding temperature, reference your local code and/or
instructions from the food product manufacturer.
Heat
Switch
Digital Heat
Control
Lights
Switch
