Designer Holding Cabinet
Model Series: 5510, 5511, and 5512
Page 14
gmpopcorn.com
Replacing Broken Glass
Broken glass panels can be easily replaced. Gold Medal
Products Co. does not ship glass. It can be
obtained from a local glass shop, always purchase tempered glass.
GLASS DIMENSIONS
(Height x Width x Thickness)
Model Series
Side Glass
Front Glass
5510
13.375” x 15.297” x .125”
13.375” x 15.297” x .125”
5511
27.375” x 15.297” x .125”
27.375” x 15.297” x .125”
5512
13.375” x 15.297” x .125”
13.375” x 29.797” x .125”
1.
Turn machine OFF, unplug unit and allow it to cool before attempting to replace glass.
2.
Carefully remove all loose pieces of broken glass.
3.
Pull out Magnetic Clip located above glass panel in cabinet interior (see Figure A below).
4.
Slide glass panel up under top ridge, then swing bottom of panel out and lower it away
from unit (see Figures A and B below).
5.
Carefully remove the rest of the broken glass.
6.
Remove all rigid glass channels from around glass to be replaced, set channels aside
for reuse.
7.
Apply decals (if desired) to new glass panel.
8.
Slide rigid glass channels over exposed edges of new glass panel.
9.
Carefully slide new glass panel up under top ridge, then lower it into the bottom channel.
10.
Reinstall magnetic clip above the new panel in cabinet interior.
Figure A
- Remove magnetic
clip located above glass panel.
Figure C
–
Swing bottom of
glass panel out, then lower
it away from unit.
Figure B
- Slide glass panel
up under top ridge.
Magnetic
Clip
General images shown for glass installation reference only.
