Goff 2460, Руководство по эксплуатации и обслуживанию

Страница: 9 / 105

Remove any bolts, nuts, tags or other foreign objects that might have been dropped or left in
the system. Inspection should be made while the power is off and before the machine is put
into production.
9. Jog (momentarily start and stop) the blast wheel motors to verify proper rotation and
operation.
10.
Abrasive can now be added through the rear blast door. Start the elevator system and pour
abrasive gradually through the access screen in amounts of approximately 50 pounds.
Abrasive will cycle through the elevator system and deposit in the abrasive storage hopper.
Continue this procedure until approximately 2000 pounds of abrasive is deposited into the
storage hopper. Following initial operation, it may be necessary to add more abrasive to the
system. The storage hopper should always be full. Abrasive separator adjustments can be
made while initial abrasive is recycling to the hopper.
11.
Test the automatic indexing for proper operation. The chamber should always rotate in a
clockwise direction.
12. Before loading parts test to check proper operation of the blast wheels.
13.
Start abrasive flow to the blast wheels.
14. Set the blast pattern. (Refer to Adjusting and Checking the Blast Pattern in Section 2.)
15. The 2460 heavy duty spinner hanger has been properly adjusted and tested prior to shipping.
However all chains, belts and oil levels should be inspected prior to initial operation.
16. Your blast cleaning system is ready for full production cleaning. Please read this operation
and maintenance manual completely before attempting to operate or repair this equipment.
1-3