Goelst G-Motion, Руководство пользователя

Страница: 34 / 44

30
4 Programming
English
After 15s. without input, the motor unit quits programming mode.
Please read the steps of this feature first before starting.
In case of a Power Cut the timer will be reset, unless the motor unit is provided with an accu pack.
SET 24hrs Timer
1. Press and hold the OPEN + CLOSE buttons until the LED on the motor unit flashes
white at high speed (after ~12s.)
(First the LED will turn white continuously, then flashes white slowly, keep pressed
until the LED flashes white at high speed)
2. Repeatedly press
OPEN
or
CLOSE
until the LED on the motor unit is yellow.
3. Shortly press the
OPEN
+
CLOSE
buttons to enter the feature menu,
4. The LED on the motor unit now flashes yellow at the current setting:
5. Cycle through the options below using
OPEN
or
CLOSE:
1x flash = Off / Reset all recorded events (Default)
2x flash = 24hrs Timer ON
3x flash = Pause all recorded events
4x flash = Learning mode
5x flash = Showroom Timer ON
6. Confirm and store setting by shortly pressing OPEN + CLOSE buttons.
7. The LED on the motor unit flashes white at high speed again for 15 seconds: using
the
OPEN
or
CLOSE
buttons another MENU 3 feature can be selected.
8. Otherwise, wait for 15 seconds or shortly press the OPEN + CLOSE buttons to quit
programming.
The LED on the motor unit switches off, the system is ready to use.
To quit programming at any time, repeatedly press the OPEN
+
CLOSE buttons or wait for 15s.
Changes made at 5 will only be saved if confirmed by pressing the
OPEN + CLOSE
buttons
.
3.4 - 3.6 (Reserved)